-
What's the Difference for Single Screw Extruder and Double Screw Extruder in Feed Production
Single screw extruder has no gearbox, one shaft, motor direct start; twin screw dog food equipment, has gearboxl, two shafts, frequency conversion control. The twin-screw dog food equipment is more stable, and the feed/food made is smooth in appearance and has a good degree of ripening.
28-06-2024 -
Coarse ash content in pet feed
When I first buy pet food, I often have a dilemma. What brand of food should I buy? Which brand of grain is good? What are the standards for good food... Various doubts may arise. Looking at the ingredient list is a recommended way for many beginners, and one indicator is the crude ash content. Many people believe that high crude ash content is not good, and animals cannot absorb Balabara. But is this the truth? Is coarse ash content a bad thing? Today, let's talk about the coarse ash content in pet food.
10-05-2024 -
The advantages of puffed floating fish feed
According to different varieties and growth stages, producing puffed floating fish feed that is suitable for their caliber and nutritional needs can well meet the feed needs of conventional aquaculture and special aquaculture, which not only facilitates aquaculture producers but also promotes production development.
19-04-2024 -
The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion Coefficient
In the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced.
28-03-2024 -
Advantages of Puffed Floating Fish Feed
Extruded aquatic feed can be suspended on the water surface for a long time. There is no need to set up a special feeding platform when feeding, just feeding at a fixed point. Fish need to float on the water surface when feeding, so they can directly observe the feeding situation of the fish, adjust the feeding amount in time, and understand the growth and health status of the fish in a timely manner. Therefore, the use of aquatic extruded feed is helpful for scientific feeding management, which not only saves a lot of time, but also improves labor productivity.
08-03-2024 -
Snack Food Machine Feed Production Machine Certification
The ISO certification audit team came to our factory to meet and communicate about our company's quality management system.
02-03-2024 -
Daily troubleshooting of twin-screw puffing machine
The twin-screw feed puffing machine mainly consists of a barrel and rotating extrusion twin-screw components inside the barrel. When the equipment is in operation, the material enters the material chamber through the feeding port, and the screw rotates and squeezes it forward. Under the action of thrust, friction, shear force, and heat, a high-pressure and high-temperature difference is formed inside and outside the chamber. At the moment when the material is extruded, it expands due to the pressure difference.
02-02-2024